Compressed Air & Pneumatic Solutions for OEMs

Machine builders design pneumatic circuits into their equipment and sometimes fit a compressor, nitrogen generator or air header as part of the package. What they need from a supplier is consistent components, dependable delivery and help when a machine is at a customer's site. Syndicate Industrial Services supplies Janatics pneumatic components, Deep Pneumatics compressors, Trident gas generators and Quickair piping to original equipment manufacturers from Lucknow, Uttar Pradesh.

How Do Machine Builders Use Pneumatics and Compressed Air?

Machine builders use pneumatics to clamp, push, lift, index and grip inside their machines. A typical circuit has cylinders or grippers, directional control valves, flow controls and an air preparation unit at the inlet. Some machines also carry their own air source: a compact compressor on mobile or stand-alone equipment, or a nitrogen generator on a laser machine.

For a builder, the component choice is made once and repeated on every machine. Standardising on one component family simplifies design, stocking and spares for the end customer. Supply reliability matters as much as the part itself, because a missing valve holds up a finished machine. The builder also has to tell each customer how much air the machine needs.

  • Janatics pneumatic components
  • Compressors and gas generators for integration
  • Support for your end customers

What Are the Main Pneumatic Supply Challenges for OEMs?

Component availability

A production schedule depends on parts arriving when promised. One late item delays dispatch.

Compact packaging

Air equipment has to fit the space the machine allows.

Documentation

End customers expect data sheets, circuit drawings and spares lists with the machine.

After-sales support

Machines go to sites where the builder has no service team.

Standardisation

Mixed component makes complicate design and spares.

What Pneumatic and Compressed Air Solutions Do OEMs Need?

Component selection support

Help with sizing cylinders, valves and air preparation units for the machine's duty.

Scheduled supply

Deliveries of standard parts planned around your production.

On-board air

Compact compressors selected for integration into mobile or stand-alone equipment.

Packaged nitrogen

Nitrogen generators for laser and process machines.

Air headers

Modular aluminium manifolds made to your layout.

Support at the customer's site

Service and spares for the equipment we supply.

Where Are Pneumatics and Compressed Air Built into Machines?

Clamping and fixturing

Cylinders that hold the workpiece during a cycle.

Indexing and transfer

Pushers, slides and rotary actuators that move parts between stations.

Pick-and-place

Grippers and vacuum cups on handling units.

Machine guarding and doors

Pneumatic door and guard actuation.

On-board compressors

Air supply on mobile and stand-alone equipment.

Nitrogen on laser and process machines

Generators packaged with the machine.

Air headers and manifolds

Distribution inside the machine frame.

Why Choose Syndicate Industrial Services as a Pneumatics Supplier?

One source for components and air

Pneumatics, compressors, gas generators and piping.

Supply planned with you

Deliveries follow your build schedule.

Support beyond dispatch

Service for the equipment we supply, at your customer's site.

Established in 2001

More than two decades of industrial utility work from our base in Lucknow.

4,000+ customers served

Experience across a wide range of plants and applications.

Branch network in Uttar Pradesh

Operations and customer support through Lucknow, Kanpur, Gorakhpur and Varanasi.

How Do You Select Pneumatic Components for a Machine?

Start from the force and speed each movement needs; these give the cylinder bore and the valve size.

FactorWhat to establish
ForceThe load each cylinder moves. Force equals air pressure times piston area, with a margin for friction
Stroke and speedTravel and cycle time, which set cylinder length and valve flow
Valve functionThe control each movement needs, and manual or solenoid operation
Air preparationFilter, regulator and lubricator at the machine inlet, as the component maker advises
EnvironmentHeat, dust, washdown or chemicals around the machine
Air consumptionCylinder volumes times cycles per minute, to tell the customer what air supply the machine needs
StandardisationOne component family across the machine range

Frequently Asked Questions About Pneumatics and Compressed Air for OEMs

01Do you supply pneumatic components for series production?

Yes. We supply Janatics components and plan deliveries around your production schedule. Share your bill of materials and volumes to start.

02How do you size a pneumatic cylinder?

From the force it has to deliver. Force equals air pressure multiplied by piston area, so choose a bore that gives the required force at your working pressure with a margin for friction and load variation.

03How do you calculate a machine's air consumption?

Add, for each cylinder, its swept volume times the number of cycles per minute, adjusted for working pressure. The total tells the end customer what compressor capacity the machine needs.

04What air quality do pneumatic components need?

Clean, dry air. A filter and regulator at the machine inlet are standard, and lubrication follows the component maker's advice.

05Can you help design a machine's pneumatic circuit?

Yes. We assist with component selection and sizing for cylinders, valves and air preparation units.

06Can a compressor or nitrogen generator be integrated into our machine?

Yes. We help select compact equipment and advise on mounting, piping and controls.

07What documentation comes with the components?

The manufacturers' data sheets and part details for the items supplied, for your machine manual and spares list.

08Do you support our customers after installation?

We provide service support and spares for the equipment we supply.

Building machines that need pneumatics or on-board air?

Share your machine type, bill of materials, volumes and any on-board air or nitrogen requirement. We will propose components and a supply plan.