Pneumatic Airline Valves Supplier, Dealer & Distributor
Syndicate Industrial Services supplies airline valves, including flow control, non-return, pilot operated non-return, quick exhaust, inline slide and logic valves, and pneumatic timers, to industrial plants, machine builders and OEMs in Lucknow, Kanpur, Gorakhpur and other serviceable industrial locations across Uttar Pradesh. These small valves shape the speed, direction and sequence of a pneumatic circuit. We help you choose from the function, size and thread your circuit needs.

- 7 product groups
- Janatics manufacturer
- Since 2001 in Lucknow
- 4 locations Lucknow, Kanpur, Gorakhpur, Varanasi
Industrial Airline Valves Range
The Janatics airline valves range in 7 product groups. Select a group to see its models and specifications, or request a quotation and we will suggest what suits your machine.

Control Components
GT pneumatic timer, which creates a timed pneumatic output.
View details
Flow Control Valve
Needle valve for flow control combined with a non-return valve for free flow, in elbow and inline types.
View details
Inline Slide Valve
3/2-way manually operated valve used in the pressure line.
View details
Logic Valve
Pneumatic logic elements such as the AND gate valve, with two inputs and one output.
View details
Non-Return Valve
GV1 series with a metal housing, gland and plastic valve cone, and female threaded ports.
View details
Pilot Operated NRV
One-way valve that prevents flow in the reverse direction, released by a pilot signal.
View details
Quick Exhaust Valve
Metal valve fitted on a directional control valve or cylinder to vent air directly to the atmosphere.
View detailsWhat Are Airline Valves and Why Are They Important?
Airline valves are the small valves fitted in the air line to control flow, direction and sequence, apart from the main directional control valves. A flow control valve sets cylinder speed, a non-return valve lets air pass one way only, a quick exhaust valve vents a cylinder fast, and a logic valve combines signals.
They are what make a pneumatic circuit behave the way the designer wants. Without a flow control valve, a cylinder runs at full speed and slams; without a quick exhaust valve, a return stroke is slow; without a non-return valve, pressure is lost back up the line. Choosing the right type, thread and size avoids those problems at low cost.
Types of Airline Valves
- Flow control valves combine a needle valve for flow control and a non-return valve for free flow, in elbow and inline types, with plastic or metal housings.
- Non-return valves (GV1 series) have a metal housing, gland and plastic valve cone, and pilot operated non-return valves are one-way valves that prevent flow in reverse, released by a pilot signal.
- Quick exhaust valves are fitted on a directional control valve or cylinder to vent air directly to the atmosphere, speeding the return stroke.
- Inline slide valves are 3/2-way manually operated valves used in the pressure line.
- Logic valves such as the AND gate valve are pneumatic logic elements, with two inputs and one output.
- Control components include the GT pneumatic timer, which creates a timed pneumatic output.
How Do Airline Valves Control a Pneumatic Circuit?
A flow control valve restricts the air with a needle, and a non-return valve in the same body lets air flow freely the other way. Fitted on the inlet or the exhaust of a cylinder, it sets the speed in one direction without slowing the other. The Janatics flow control valve is used to control the sequence of operation, and its non-return part reduces the total cycle time.
A quick exhaust valve opens a large vent when the supply pressure falls, so the cylinder empties its air close to itself instead of through the long line. A pilot operated non-return valve holds pressure in a cylinder until a pilot signal opens it, which holds a load safely.
How to Choose the Right Airline Valves for Your Application?
Start from what the machine has to do, then match size, function and air supply. These are the factors we ask about before recommending a model:
| Factor | What to establish |
|---|---|
| Function | Flow control to set speed, non-return to stop reverse flow, quick exhaust to speed the return, logic to combine signals. |
| Inlet or exhaust control | Fitting the flow control valve on the exhaust of a double-acting cylinder gives smoother speed control than on the inlet. |
| Thread and port size | Flow control valves are listed in M5 (metric), R or G 1/8, 1/4, 3/8 and 1/2 threads, with 3/4 for metal housings. |
| Housing material | Plastic housings with tube insertion for neat tubing runs, metal housings with female threads for tougher work. |
| Tube connection | Plastic-housed types take the tube directly; others have threads that need fittings. |
| Operation | Manual (inline slide), pilot (pilot operated non-return) or automatic (non-return, quick exhaust). |
| Working pressure | Janatics components are rated for 0 to 10 bar; check each valve's published range. |
| Circuit sequence | Timers and logic valves allow simple sequence control without electronics. |
The models, sizes and ratings are on the page of each product group above. Pneumatic components perform best on clean, dry air, so see our compressed air dryers and filters and drains.
Where Are Airline Valves Used?
Janatics does not publish a list of industries for these products. The uses below are the ones its product pages state, or follow directly from what each product does. If you have a specific application, tell us and we will confirm suitability before you order.
Setting actuator speed
Flow control valves limit the air flow to the attached device.
Faster exhaust
Quick exhaust valves vent air directly at the actuator.
Safety and sequencing circuits
Janatics lists the pilot operated non-return valve for them, and for stopping a cylinder in intermediate positions.
Logic and safety circuits
Janatics lists the AND valve for safety circuits and logic control.
Timing and counting
Pneumatic timers, reset modules and counters.
Manual line isolation
The inline slide valve connects, disconnects and exhausts the line by hand.
Pneumatic Components, Compressed Air and Technical Support
Pneumatic components perform only as well as the compressed air that reaches them. A rotary screw or reciprocating air compressor makes the air, compressed air piping carries it, and the Janatics components use it. The same team supplies both ends of the line, so the air quality and the component ratings are matched. Our team sizes components to your requirement as part of compressed air solutions, and supports them with scheduled servicing and spare parts under AMC services. See also industrial automation.
Airline Valves Supplier Across Uttar Pradesh
Syndicate Industrial Services works as a supplier of airline valves from its head office in Lucknow, and through its branches in Kanpur and Gorakhpur, with a further branch in Varanasi. Beyond these cities we supply pneumatic components to plants across Uttar Pradesh, as our project record and project map show. Service availability depends on operational coverage and project requirements, so send us your location and we will confirm how we can support it.
Why Choose Syndicate Industrial Services for Airline Valves?
- In business since 2001. Syndicate Industrial Services began operations in Lucknow in 2001 and serves industrial customers across Uttar Pradesh.
- Janatics range. We supply the Janatics range, including these 7 airline valves product groups.
- Components and compressed air from one supplier. Compressors, dryers, filters, piping and pneumatic components from Deep Pneumatics, Trident, Quickair and Janatics.
- Selection based on your numbers. We size components to your load, stroke, speed, flow and pressure before recommending a model.
- Branch network. Operations and customer support run through Lucknow (head office), Kanpur, Gorakhpur and Varanasi.
Frequently Asked Questions About Airline Valves
01What is a flow control valve?
A flow control valve restricts the flow of compressed air to set the speed of a cylinder or other pneumatic device. The Janatics type combines a needle valve for flow control with a non-return valve for free flow in the other direction, so it slows one direction without slowing the other.
02Where should a flow control valve be fitted on a cylinder?
On a double-acting cylinder, fitting the flow control valve on the exhaust gives smoother speed control than on the inlet, because the piston moves against a controlled back pressure. Single-acting cylinders usually have the valve on the inlet or exhaust, depending on which stroke is to be slowed.
03What does a non-return valve do?
A non-return valve lets compressed air flow in one direction only and blocks flow in reverse. It keeps pressure in a part of the circuit, for example to hold a cylinder or stop pressure draining back up the line. Janatics lists ported non-return valves and pilot operated types.
04What is a pilot operated non-return valve?
A pilot operated non-return valve is a one-way valve that prevents flow in reverse until a pilot signal opens it. It holds air in a cylinder to keep a load in position, and releases it when the pilot pressure is applied, so the cylinder can move.
05What is a quick exhaust valve used for?
A quick exhaust valve is fitted on a directional control valve or cylinder to vent air directly to the atmosphere. It lets the cylinder empty quickly instead of pushing its air back through the line, which shortens the return stroke and cycle time.
06What is a logic valve in pneumatics?
A pneumatic logic valve combines air signals the way an electrical logic gate does. The AND gate valve has two inputs and one output, and passes a signal only when both inputs are pressurised. Logic valves allow simple interlocks and sequences without electronics.
07What is a pneumatic timer?
A pneumatic timer creates a timed pneumatic output: it delays a signal by a set time using air flow through a restrictor and a small volume. The Janatics GT timer is listed among its control components, and is used for simple timed sequences.
08Where can I find an airline valve supplier in Uttar Pradesh?
Syndicate Industrial Services supplies Janatics airline valves from its head office in Lucknow, with branches in Kanpur, Gorakhpur and Varanasi. Use the enquiry form on this page or call +91 93350 37579 to confirm availability for your location.
Looking for Industrial Airline Valves?
Tell us about your machine: the load, stroke and cycle time, the working pressure and the control voltage. We will review it and recommend suitable components with a quotation.