Pneumatic One Touch Fittings Supplier, Dealer & Distributor

Syndicate Industrial Services supplies one touch push-in fittings, including unions, connectors, elbows, tees, couplers and distributors, to industrial plants, machine builders and OEMs in Lucknow, Kanpur, Gorakhpur and other serviceable industrial locations across Uttar Pradesh. One touch fittings connect pneumatic tube to cylinders, valves and each other, without tools. We help you choose the shape, thread and tube size your circuit needs.

Janatics one touch push-in fittings and unions
Janatics one touch fittings
  • 13 product groups
  • Janatics manufacturer
  • Since 2001 in Lucknow
  • 4 locations Lucknow, Kanpur, Gorakhpur, Varanasi

Industrial One Touch Fittings Range

The Janatics one touch fittings range in 13 product groups. Select a group to see its models and specifications, or request a quotation and we will suggest what suits your machine.

What Are One Touch Fittings and Why Are They Important?

A one touch fitting joins a pneumatic tube to a component or to another tube by pushing the tube in, and releases it when the collet cap is pressed. No tools or thread tape are needed on the tube side, and the tube can be inserted and released without rotating it.

Fittings decide how quick and leak-free a pneumatic circuit is to build and change. A poor fitting leaks air around the clock, and a wrong thread or tube size will not seal. Janatics lists push-in fittings for metric tubes of 4, 6, 8, 10, 12, 14 and 16 mm outer diameter, in plastic, brass and stainless steel, so a fitting can be matched to the tube, the port and the environment.

Types of One Touch Fittings

  • Unions join tube to tube, in straight, elbow, tee, Y, bulkhead and cross forms, and in reducing sizes.
  • Straight and elbow connectors have a male or female thread at one end and tube insertion at the other, the elbow turning the line through a right angle.
  • Tee connectors and Y-shape fittings join one inlet to two outlets.
  • Multi distributors and junction boxes split one inlet line to several outlets.
  • Swivel fittings have a swivelling body so the tube can rotate, avoiding twisting.
  • Nipples, plugs and self-sealing fittings connect port threads, blank off lines, and stop airflow when the tube is removed.
  • Quick couplers and the air blow gun give fast connection of tools and handy blow-off.

How Does a One Touch Fitting Work?

A collet grips the tube as it is pushed in, and an O-ring seals around it. Pushing the tube in past the collet seats it against the seal. Pressing the collet cap back releases the grip so the tube comes out, and the air pressure itself pushes the collet to grip harder. The fitting's threaded end is screwed into the component port.

Tubes of nylon (PA6), soft nylon, polyethylene and polyurethane in various colours can be used, as listed by Janatics, which is why tube material and outer diameter must be matched to the fitting.

How to Choose the Right One Touch Fittings for Your Application?

Start from what the machine has to do, then match size, function and air supply. These are the factors we ask about before recommending a model:

FactorWhat to establish
Tube outer diameterMetric sizes of 4, 6, 8, 10, 12, 14 and 16 mm are listed. The fitting must match the tube's outer diameter.
Thread and portMale or female thread of the right type and size for the component port; nipples and adaptors join different sizes.
ShapeStraight, elbow, tee, Y or union, chosen from the routing. Elbows and swivels help in tight spaces.
MaterialPlastic for general use, brass or stainless steel for tougher or hygienic environments.
Tube materialNylon, polyurethane or polyethylene tube, each suited to different flexibility and temperature.
Leak-free sealingSelf-sealing fittings stop airflow when a tube is removed, which suits frequent changes.
Working pressureJanatics components are rated for 0 to 10 bar; check the published rating for the fitting.
Quantity and standardisationOEMs standardise a few sizes and shapes across machines to simplify the bill of materials.

The models, sizes and ratings are on the page of each product group above. Pneumatic components perform best on clean, dry air, so see our compressed air dryers and filters and drains.

Where Are One Touch Fittings Used?

Janatics does not publish a list of industries for these products. The uses below are the ones its product pages state, or follow directly from what each product does. If you have a specific application, tell us and we will confirm suitability before you order.

Automotive, engineering, fabrication and machine tools

Janatics names these among the uses of its junction box.

Cleaning and drying

Janatics describes the air blow gun for cleaning machines and objects and clearing metal burrs and chips.

Circuits that do not need a continuous supply

Janatics lists self sealing fittings for them.

Connecting tubing to valves and cylinders

The general use Janatics gives for one touch fittings.

Quick connection of air lines

Quick couplers connect and disconnect lines without tools.

Joining different port threads

Nipples connect threads of different sizes.

Pneumatic Components, Compressed Air and Technical Support

Pneumatic components perform only as well as the compressed air that reaches them. A rotary screw or reciprocating air compressor makes the air, compressed air piping carries it, and the Janatics components use it. The same team supplies both ends of the line, so the air quality and the component ratings are matched. Our team sizes components to your requirement as part of compressed air solutions, and supports them with scheduled servicing and spare parts under AMC services. See also industrial automation.

One Touch Fittings Supplier Across Uttar Pradesh

Syndicate Industrial Services works as a supplier of one touch fittings from its head office in Lucknow, and through its branches in Kanpur and Gorakhpur, with a further branch in Varanasi. Beyond these cities we supply pneumatic components to plants across Uttar Pradesh, as our project record and project map show. Service availability depends on operational coverage and project requirements, so send us your location and we will confirm how we can support it.

Why Choose Syndicate Industrial Services for One Touch Fittings?

  • In business since 2001. Syndicate Industrial Services began operations in Lucknow in 2001 and serves industrial customers across Uttar Pradesh.
  • Janatics range. We supply the Janatics range, including these 13 one touch fittings product groups.
  • Components and compressed air from one supplier. Compressors, dryers, filters, piping and pneumatic components from Deep Pneumatics, Trident, Quickair and Janatics.
  • Selection based on your numbers. We size components to your load, stroke, speed, flow and pressure before recommending a model.
  • Branch network. Operations and customer support run through Lucknow (head office), Kanpur, Gorakhpur and Varanasi.

Frequently Asked Questions About One Touch Fittings

01What is a one touch fitting?

A one touch fitting is a push-in connector that joins a pneumatic tube to a component or another tube. The tube is pushed in and held by a collet, and released by pressing the collet cap. No tools are needed on the tube side, and it seals against leaks.

02How do I release a tube from a push-in fitting?

Press the collet cap in evenly with a finger while pulling the tube out. Without pressing the cap, the collet grips the tube harder as pressure rises. Always release the air pressure from the line first, and cut the tube end square before reinserting it.

03What tube sizes do one touch fittings take?

Janatics lists fittings for metric tubes with outer diameters of 4, 6, 8, 10, 12, 14 and 16 mm. The fitting must match the tube's outer diameter. Check the model's page for the sizes and threads available in each form.

04What tube materials can be used with one touch fittings?

Janatics lists nylon (PA6), soft nylon, polyethylene and polyurethane tubes, in various colours, for its push-in fittings. Choose by flexibility, working pressure and temperature, and make sure the tube's outer diameter matches the fitting.

05What is a self-sealing fitting?

A self-sealing fitting has an integrated mechanism that stops the airflow when the tube is disconnected and taken out. This avoids air loss and the need to shut off the line first, so it suits circuits where tubes are changed often.

06What is a multi distributor or junction box used for?

A multi distributor is a single connector with several outlets taken through tubes from one inlet line. A junction box is a metal block with one inlet and one or more outlets. Both split an air supply neatly to several points.

07What is a swivel fitting?

A swivel fitting has a swivelling body with tube insertion and a male thread for the port, so the tube can rotate without twisting or loosening the thread. It is used where the connected part or the tube moves.

08Where can I find a one touch fitting supplier in Uttar Pradesh?

Syndicate Industrial Services supplies Janatics one touch fittings from its head office in Lucknow, with branches in Kanpur, Gorakhpur and Varanasi. Use the enquiry form on this page or call +91 93350 37579 to confirm availability for your location.

Looking for Industrial One Touch Fittings?

Tell us about your machine: the load, stroke and cycle time, the working pressure and the control voltage. We will review it and recommend suitable components with a quotation.

+91 93350 37579 sales@sisindia.in