Air Preparation Units (FRL) Supplier, Dealer & Distributor

Syndicate Industrial Services supplies air preparation units, including filters, regulators, lubricators and combined FRL units, to industrial plants, machine builders and OEMs in Lucknow, Kanpur, Gorakhpur and other serviceable industrial locations across Uttar Pradesh. They clean the compressed air, set a steady working pressure and, where needed, add oil mist, at the point where the air enters a machine. We help you choose from your air flow, pressure and the equipment the air feeds.

Janatics filter regulator units in a range of sizes
Janatics filter regulator units
  • 13 product groups
  • Janatics manufacturer
  • Since 2001 in Lucknow
  • 4 locations Lucknow, Kanpur, Gorakhpur, Varanasi

Industrial Air Preparation Units Range

The Janatics air preparation units range in 13 product groups. Select a group to see its models and specifications, or request a quotation and we will suggest what suits your machine.

Distribution Block from Janatics

Distribution Block

Box-type connector with one inlet and multiple outlets.

View details
Filter from Janatics

Filter

Air filters, with a variety of drains fitted to remove the separated water.

View details
FRC from Janatics

FRC

Filter and regulator in one unit for clean air at regulated pressure, with polycarbonate or metal bowl and manual, semi-auto or auto drain.

View details
FRCLM from Janatics

FRCLM

Filter-regulator combination and lubricator joined as one set of air preparation elements.

View details
FRLM from Janatics

FRLM

Filter, regulator and lubricator joined together with accessories as one air preparation set.

View details
Lubricator from Janatics

Lubricator

Mixes oil into the compressed air stream to improve life and performance and reduce wear of pneumatic elements.

View details
Mist Separator from Janatics

Mist Separator

FS1 series with a borosilicate element that filters contaminants, moisture and oil from compressed air.

View details
Mounting and Accessories from Janatics

Mounting and Accessories

Mounting and accessories for the FRL group of products, precision regulators and proportional pressure regulators.

View details
Precision Regulator from Janatics

Precision Regulator

Maintains a highly accurate, consistent output pressure regardless of changes in the supply.

View details
Proportional Pressure Regulator from Janatics

Proportional Pressure Regulator

Electronically controlled regulator whose outlet pressure follows an electrical voltage or current input.

View details
Regulator from Janatics

Regulator

Sets and controls the compressed air pressure to suit the circuit.

View details
Shut Off Valve from Janatics

Shut Off Valve

Stops or controls the flow of compressed air in a pipe.

View details
Soft Start Valve from Janatics

Soft Start Valve

Controls the initial flow in a pneumatic system to protect the pneumatic elements.

View details

What Is an Air Preparation Unit and Why Is It Important?

An air preparation unit conditions compressed air at the point of use: a filter removes water and dirt, a regulator sets the working pressure, and a lubricator adds a fine oil mist where the equipment needs it. Together they are called an FRL unit. Janatics also lists combinations: the FRC (filter and regulator in one body), the FRLM and the FRCLM.

Air that has already been treated at the compressor room still picks up moisture and scale in the pipework, and its pressure varies. Cylinders and valves work best on clean air at a steady, set pressure, so an air preparation unit at each machine protects the components, keeps operation consistent and saves air by running at no more pressure than the work needs.

Types of Air Preparation Units and Accessories

  • Filter removes water and dirt; bowl drains are manual, semi-automatic or automatic.
  • Regulator sets and controls the air pressure to suit the circuit, and the precision regulator holds a highly accurate, consistent output pressure whatever the supply does.
  • Proportional pressure regulator is electronically controlled, with outlet pressure that follows an electrical voltage or current signal.
  • Lubricator mixes oil into the air stream to improve life and performance and reduce wear in pneumatic elements.
  • FRC, FRLM and FRCLM combine the elements into one set, joined with accessories.
  • Mist separator (FS1 series) uses a borosilicate element to filter contaminants, moisture and oil from the air.
  • Soft start valve, shut-off valve and distribution block control the initial flow, isolate the supply and split it to several outlets.

How Does an Air Preparation Unit Work?

Air flows through the filter first, then the regulator, then the lubricator if there is one. In the filter, a bronze or polyamide element with a separator and shield removes moisture and dirt, and the bowl collects the water. The regulator is diaphragm operated and relieving: turning the knob sets the outlet pressure and a non-return valve passes flow in the reverse direction. The lubricator then adds a metered amount of oil.

The unit is mounted in line using its IN and OUT ports, usually with a mounting bracket, and sits upstream of the valves and cylinders it protects.

How to Choose the Right Air Preparation Units for Your Application?

Start from what the machine has to do, then match size, function and air supply. These are the factors we ask about before recommending a model:

FactorWhat to establish
Air flow and port sizeThe unit must pass the air the machine uses at its peak without a large pressure drop; port size and flow ratings are listed for each model.
Operating pressureJanatics components are rated for 0 to 10 bar, and the regulator sets the circuit pressure within that.
Filter element and bowlBronze or polyamide element, and polycarbonate or metal bowl. Metal bowls suit tougher conditions, and indicators show the level.
Drain typeManual, semi-automatic or automatic. Automatic drains remove water without attention.
LubricationAdd a lubricator only if the downstream equipment needs oil mist. Oil-free circuits use FRC units.
Pressure accuracyUse a precision or proportional regulator where pressure must be held tightly or changed electrically.
Mounting and accessoriesBrackets, clamps and connectors for combining and fixing units are listed under mounting and accessories.
Upstream air qualityThe unit trims what reaches the machine; a dryer and filters upstream do the bulk of the drying.

The models, sizes and ratings are on the page of each product group above. Pneumatic components perform best on clean, dry air, so see our compressed air dryers and filters and drains.

Where Are Air Preparation Units Used?

Janatics does not publish a list of industries for these products. The uses below are the ones its product pages state, or follow directly from what each product does. If you have a specific application, tell us and we will confirm suitability before you order.

Cleaning compressed air

The filter removes dust particles, water and oil aerosols to protect valves, actuators and tools.

Setting and holding pressure

The regulator keeps the outlet pressure constant when the inlet pressure fluctuates.

Lubricating pneumatic elements

The lubricator adds oil mist to the air to reduce wear.

Saving space

The FRC combines a filter and a regulator in one unit.

Modular, serviceable assemblies

FRLM and FRCLM units can be serviced without disturbing the pipeline.

Isolating and gently pressurising a line

Shut off valves and soft start valves protect and isolate the pneumatic elements.

Pneumatic Components, Compressed Air and Technical Support

Pneumatic components perform only as well as the compressed air that reaches them. A rotary screw or reciprocating air compressor makes the air, compressed air piping carries it, and the Janatics components use it. The same team supplies both ends of the line, so the air quality and the component ratings are matched. Our team sizes components to your requirement as part of compressed air solutions, and supports them with scheduled servicing and spare parts under AMC services. See also industrial automation.

Air Preparation Units Supplier Across Uttar Pradesh

Syndicate Industrial Services works as a supplier of air preparation units from its head office in Lucknow, and through its branches in Kanpur and Gorakhpur, with a further branch in Varanasi. Beyond these cities we supply pneumatic components to plants across Uttar Pradesh, as our project record and project map show. Service availability depends on operational coverage and project requirements, so send us your location and we will confirm how we can support it.

Why Choose Syndicate Industrial Services for Air Preparation Units?

  • In business since 2001. Syndicate Industrial Services began operations in Lucknow in 2001 and serves industrial customers across Uttar Pradesh.
  • Janatics range. We supply the Janatics range, including these 13 air preparation units product groups.
  • Components and compressed air from one supplier. Compressors, dryers, filters, piping and pneumatic components from Deep Pneumatics, Trident, Quickair and Janatics.
  • Selection based on your numbers. We size components to your load, stroke, speed, flow and pressure before recommending a model.
  • Branch network. Operations and customer support run through Lucknow (head office), Kanpur, Gorakhpur and Varanasi.

Frequently Asked Questions About Air Preparation Units

01What is an air preparation unit?

An air preparation unit is a set of devices at a machine's air inlet that conditions compressed air: a filter, a regulator and, optionally, a lubricator. It removes water and dirt, sets a steady working pressure and adds a fine oil mist where needed, protecting the cylinders and valves downstream.

02What does FRL stand for?

FRL stands for filter, regulator and lubricator. They are used in that order along the air line before pneumatic equipment. Janatics also lists the FRC, which combines filter and regulator in one body, and the FRLM and FRCLM, which are sets of the elements joined with accessories.

03Why is a filter regulator needed on a pneumatic machine?

Air in the pipework carries moisture and scale, and its pressure varies. The filter removes them and the regulator holds a set pressure, so cylinders and valves get clean air at a steady pressure. This protects the seals and keeps the machine's motion consistent.

04When do I need a lubricator?

Add a lubricator only if the downstream equipment is designed for oil mist, because it reduces wear in those components. Oil-free circuits, or equipment sensitive to oil, should use a filter and regulator only. Check the equipment's manual before fitting one.

05What is a precision regulator?

A precision regulator holds a highly accurate, consistent outlet pressure regardless of changes in the supply. It is used where a standard regulator's drift is too large. A proportional pressure regulator goes further, with outlet pressure that follows an electrical voltage or current signal.

06What drain types are available on filters?

Janatics lists manual, semi-automatic and automatic drains on its filters and FRC units. A manual drain is opened by hand, a semi-automatic drain opens when air pressure is removed, and an automatic drain removes collected water without attention.

07How do I choose the size of an air preparation unit?

Choose from the peak air flow the machine uses and the working pressure, so the unit passes the flow without a large pressure drop. Then choose the filter bowl, the drain type and whether a lubricator is needed. Send us the machine's air demand and we will recommend a unit.

08Where can I find an air preparation unit supplier in Uttar Pradesh?

Syndicate Industrial Services supplies Janatics air preparation units from its head office in Lucknow, with branches in Kanpur, Gorakhpur and Varanasi. Use the enquiry form on this page or call +91 93350 37579 to confirm availability for your location.

Looking for Industrial Air Preparation Units?

Tell us about your machine: the load, stroke and cycle time, the working pressure and the control voltage. We will review it and recommend suitable components with a quotation.

+91 93350 37579 sales@sisindia.in